Table of Contents
Advertisement
Option
Print Cover Page
Print Master
Print to PS Error
Scale to Fit
Stapler Mode
Tray Alignment
Use PDF XObjects
S
ETUP OPTION REFERENCE
Settings
(default is underlined)
Yes, No
Yes, No
Yes, No
On, Off
Off, Front, Rear, Dual
Enable, Disable
On, Off
Description
Prints a cover page (job summary) containing the name of the user who
sent the job, document name, server name, time the job was printed,
number of pages printed, and status of the job. Specify whether to print
before or after the job, or both. If a PostScript error occurs and the Print
to PS Error option is set to Yes, the cover page lists the PostScript error
message instead of the job status.
Select Yes to print a FreeForm master when created and printed to the
Fiery EXP8000/50. The master is retained on the Fiery EXP8000/50
after printing unless deleted later. Select No only to process and hold a
FreeForm master on the Fiery EXP8000/50.
Specify whether the Fiery EXP8000/50 should print the available
portion of a print job when it encounters a PostScript error. Select Yes to
print the portion of the job that was processed before the error occurred.
Select No to cancel the print job entirely when a PostScript error is
encountered. Leave this option at No unless you encounter
printing problems.
Specify whether to scale a document to a selected paper size if the
document size is different from the paper size. With the Off setting, if
the document size is larger than the selected paper size, the document is
cropped to the paper size when printed.
This option staples collated copies. Specify where to place the staple on
stapled copies. You can specify this option when the finisher is attached.
For more information about Stapling settings, see
Specify whether to allow users to align the media trays.
Specify whether images in PDF files are cached to reduce the need to
reprocess the same image in a file.
24
Print
Options.
Advertisement
Table of Contents
