Connecting Network Cable To The Fiery Exp8000/50; Back View Of The Fiery Exp8000/50; Ethernet Connection - EFI DocuColor 5000 Configuration And Setup

Connecting network cable to the Fiery EXP8000/50

1 Power connector
2 USB connectors
3 Network connector
(10/100/1000BaseT)
4 Not used
5 Printer interface connectors
P F EXP8000/50 S
REPARING FOR IERY
This section includes an illustration of the Fiery EXP8000/50 back panel, and provides
information about connecting the Fiery EXP8000/50 to the network.

Back view of the Fiery EXP8000/50

Fiery EXP8000
1
2
3
4
5
Depending on the hardware, the back panel of the Fiery EXP8000 can be one of two
N :
OTE
slightly different configurations, and both are illustrated.

Ethernet connection

For Ethernet connections, the Fiery EXP8000/50 supports Unshielded Twisted Pair UTP
(Unshielded Twisted Pair) cabling for these network speeds:
• 10BaseT: Category 3 or higher
• 100BaseTX: Category 5 or higher (4-pair/8-wire, short-length)
• 1000BaseT: Category 5e or higher (4-pair/8-wire, short-length)
ETUP
1
2
3
4
5
Fiery EXP50
1
2
3
4
5
2
19