Cannot Connect To The Fiery Exp8000/50 With Utilities - EFI DocuColor 5000 Configuration And Setup

T
ROUBLESHOOTING
See the following table for the appropriate name.
In this location
Server Setup
Windows hosts file
Windows Setup for
TCP/IP
UNIX /etc/printcap file (BSD)
Solaris
Add New Server dialog box when
configuring a utility

Cannot connect to the Fiery EXP8000/50 with utilities

If users cannot connect to the Fiery EXP8000/50, check the following:
Fiery EXP8000/50 Setup:
correct parameters (for example, for TCP/IP, the IP address), and you must publish either the
Print queue or Hold queue.
You can check these settings quickly by printing a Configuration page.
On the client computer:
For this item
Server Name option
name
host name
(TCP/IP host name)
lpd host name
(TCP/IP host name)
Name of printer on lpd print, hold, or direct
host machine
rp line print, hold, or direct
lpadmin queuename print, hold, or direct
New Device DC8000-DC7000 or
DC5000
Server Name
(TCP/IP host name)
The appropriate network protocol must be enabled, with the
The appropriate network protocols must be loaded.
TCP/IP networks
Administrator defines
DNS name
DNS name
DNS name
40
See
Configure
Help
page 9
page 9
page 12
Utilities