Table of Contents
Advertisement
Introduction
This section gives an overview of the Extron UCS 303 Collaboration switchers. Topics
include:
•
•
•
•
•
About this Guide
This guide describes the UCS 303 Collaboration switcher and provides instructions for an
experienced installer to set up and operate it.
ATTENTION:
In this guide, the terms "UCS," "UCS 303," and "switcher" are used interchangeably to refer
to the UCS 303.
About the UCS 303 Switcher
The Unified Communication System (UCS) 303 is a three input, one output multi-format
video and USB collaboration switcher with built-in display control that supports HDMI 2.0b,
DisplayPort 1.2, USB 3.2 (SuperSpeed 10 Gbps) and HDCP 2.3 specifications. It integrates
AV, USB switching and display control in environments such as conference rooms, huddle
rooms, and classrooms.
The switcher features one HDMI input, one DisplayPort input, one USB-C input, and one
HDMI output with CEC. It also has three USB switched Host inputs and a built-in USB hub
to switch and share USB peripherals such as USB web cams, touch displays, and USB
microphones. Audio can be extracted from any video input.
Resolutions up to 4K @ 60 Hz are supported, along with EDID Minder, HDCP 2.3, and
configuration via Product Configuration Software (PCS). All models extend signals up to
330 feet (100 meters). The UCS 303 is housed in a 1U high, half rack width, 8.5 inches
deep enclosure.
About this Guide
About the UCS 303 Switcher
Features
USB System Architecture
Application Diagrams
•
Installation and service must be performed by authorized personnel only.
•
L'installation et l'entretien doivent être effectués uniquement par un électricien
qualifié.
UCS 303 • Introduction
1
Advertisement
Table of Contents
