Table of Contents
Advertisement
Starting PCS
In order to use the PCS software, the UCS must be connected to your computer via the
front panel USB-C port or the rear panel LAN port.
1.
2.
3.
4.
To start the configuration program, do either of the following:
From the desktop Start menu, select
•
Extron/Extron Product Configuration Software.
The Extron Product Configuration Software window opens.
Double-click on the EAF.exe file, located on your computer at
•
c:\Program Files(x86)]\Extron\Extron PCS.
In the Device Discovery panel of the PCS window, click on the name of your UCS 303
(see figure 18,
). (You may need to scroll to locate it, depending on the number of
1
devices listed.) The Connect button (
NOTE: If the UCS is connected via the LAN port (UCS 303 only), its IP address
is displayed in the IP Address column. If it has a USB connection, the generic
address for devices connected via IP over USB (203.0.113.22) is displayed.
Figure 18.
Device Discovery Panel on PCS Connection Screen
Click Connect (
), or double-click on the UCS name in the Device Discovery list.
2
If the unit has a password defined, the following prompt opens:
Figure 19.
Password Prompt
Enter the password for the unit and click Continue.
) becomes available.
2
UCS 303 • Product Configuration Software
44
Advertisement
Table of Contents
