Installation; Installation Overview - Extron electronics UCS 303 User Manual

Three input, one output collaboration switcher
Hide thumbs Also See for UCS 303:
Table of Contents

Advertisement

Installation

This section describes the installation and setup of the UCS 303 switcher. Topics include:

Installation Overview

CAUTION: Remove power from the system before wiring.
ATTENTION :
ATTENTION:
To install and set up a UCS 303 switcher:
1.
2.
3.
4.
5.
Installation Overview
Rear Panel Connections
Wiring the CONTACT/TALLY Connectors
LockIt HDMI Cable Lacing Bracket Installation
Wiring the LAN Port
Connecting Multiple UCS 303 Switchers in a System
Coupez l'alimentation avant de faire l'installation électrique.
Use electrostatic discharge precautions (be electrically grounded) when making
connections. Electrostatic discharge (ESD) can damage equipment, although
you may not feel, see, or hear it.
Prenez des précautions contre les décharges électrostatiques (soyez
électriquement relié à la terre) lorsque vous effectuez des connexions. Les
décharges électrostatiques (ESD) peuvent endommager l'équipement, même si
vous ne pouvez pas le sentir, le voir ou l'entendre.
Turn off all equipment and disconnect the unit from the power source.
Mount the switcher (optional) on a rack shelf or furniture (see
page 63).
Connect video sources and supporting host devices:
Input 1 — Connect an HDMI source and a supporting host device such as a PC or
a Next Unit of Computing (NUC) to the HDMI and associated host input connector
(see
figure 5,
and
K
B
Input 2 — Connect a DisplayPort source and a supporting host device such as a
PC or an NUC to the DisplayPort input and associated host connectors (
).
B
NOTE: LockIt cable lacing brackets are provided to secure the HDMI cables to the
ports to reduce stress on the HDMI connectors and prevent signal loss due to
loose cable connections (see
on page 13).
Connect a USB‑C source to the rear panel USB-C connector (
Connect a video output — Connect an HDMI display to the HDMI output (
display the transmitted digital image.
on the next page).
LockIt HDMI Cable Lacing Bracket Installation
Mounting
starting on
and
J
).
I
) to
C
UCS 303 • Installation
7 7

Advertisement

Table of Contents
loading

Table of Contents