Table of Contents
Advertisement
Connecting Using the TCP/IP Panel
The TCP/IP panel connects PCS to a specific device through Ethernet. To access this
panel, click the TCP/IP tab to the left of the Device Discovery panel (see figure 21,
Figure 21.
To connect directly to a connected device with a known IP address:
In the IP Address/Hostname field of the Target Device panel (
1.
address of the desired device.
2.
Enter the device password in the Password field.
NOTES:
•
•
3.
In the Port field of the Target Device panel (
device (the default is 4523).
NOTE: If the TCP/IP port number is not known, leave this field blank. PCS scans for
the port and fills it in.
4.
Click the Connect button (
TCP/IP Panel
The factory configured passwords for all accounts on this device have been
set to the device serial number. Passwords are case sensitive. In the event
of an absolute system reset, the administrator passwords are set to extron
and the user passwords are set to no password (blank).
If desired, select the Show Characters checkbox (below the Port field) to
display the password characters.
). A new device tab opens.
5
2
), enter the port number of the desired
2
UCS 303 • Product Configuration Software
).
1
), enter the IP
46
Advertisement
Table of Contents
