Extron electronics USB HUB4 AAP User Manual
Usb hub4 series usb hubs
Hide thumbs
Also See for USB HUB4 AAP:
- User manual (28 pages) ,
- User manual (24 pages) ,
- Setup manual (2 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Extron electronics USB HUB4 AAP
Summary of Contents for Extron electronics USB HUB4 AAP
- Page 1 User Guide USB Hubs USB HUB4 Series AAP and MAAP USB Hubs 68-1735-01 Rev. C 05 17...
-
Page 2: Safety Instructions
Safety Instructions Safety Instructions • English Istruzioni di sicurezza • Italiano WARNING: This symbol, , when used on the product, is intended to AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad alert the user of the presence of uninsulated dangerous voltage within avvertire l’utente della presenza di tensione non isolata pericolosa the product’s enclosure that may present a risk of electric shock. - Page 3 ついては、 エクス トロンのウェブサイ ト より 『Extron Safety www.extron.com and Regulatory Compliance Guide』 (P/N 68-290-01) をご覧ください。 Copyright © 2017 Extron Electronics. All rights reserved. Trademarks All trademarks mentioned in this guide are the properties of their respective owners. The following registered trademarks( ®...
- Page 4 FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. The Class A limits provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
-
Page 5: Conventions Used In This Guide
Conventions Used in this Guide Notifications The following notifications are used in this guide: CAUTION: Risk of minor personal injury. ATTENTION : Risque de blessure mineure. ATTENTION: • Risk of property damage. • Risque de dommages matériels. NOTE: A note draws attention to important information. Specifications Availability Product specifications are available on the Extron website, www.extron.com. -
Page 7: Table Of Contents
Contents Introduction ..........1 About this Guide ..........1 About the USB HUB4 .......... 1 Features .............. 1 Application Diagram ..........2 Installation ..........3 Installation Overview ..........3 Rear Panel Features ..........4 Connecting to the Captive Screw USB Connector ............ -
Page 9: Introduction
Introduction • About this Guide About the USB HUB4 • • Features • Application Diagram About this Guide This guide contains information about the installation and operation of the Extron USB HUB4 AAP and the USB HUB4 MAAP. The terms “hub” and “HUB4” refer to both models interchangeably when instructions apply to both. -
Page 10: Application Diagram
The following diagram shows an example of a USB HUB4 AAP mounted to an MLM wallplate and installed in a podium. DISPLAY AUTO IMAGE MUTE VOLUME ACTIVITY CONFIG USB HUB4 AAP MediaLink Extron MLM 104 LAAP Extron with USB HUB4 AAP MLC 104 IP Plus Four-Port USB 2.0 Hub... -
Page 11: Installation
Installation • Installation Overview Rear Panel Features • • Front Panel Features • Mounting the USB HUB4 Installation Overview If using an electrical junction box or a mounting bracket, install it in the wall or furniture (see Wall or Furniture Mounting on page 9). -
Page 12: Rear Panel Features
Rear Panel Features The rear panels of the USB HUB4 AAP and USB HUB4 MAAP models contain two types of USB In connectors, either of which can be used for the USB cable that connects the computer to the HUB4. POWER POWER 12VDC 12VDC POWER POWER 500mA... -
Page 13: Connecting To The Captive Screw Usb Connector
Connecting to the Captive Screw USB Connector It is recommended that you connect your computer to the HUB4 by plugging the mini B end of the provided USB cable into the USB port on the rear panel. If, however, your space is limited and you need to use the captive screw USB In connector instead, prepare and connect the cable as follows: Cut off the B end of a USB A-to-B or A-to-mini B cable. -
Page 14: Connecting The External Power Supply
Plug the A end of the USB cable into a USB port on your computer (see figure 4). USB HUB4 AAP Mounting Frame USB Mini B POWER Connector 500mA USB IN USB A USB 1 WIRE COLOR WIRE COLOR W G B... -
Page 15: Wiring The Power Connector
ATTENTION: • Always use a power supply provided by or specified by Extron. Use of an unauthorized power supply voids all regulatory compliance certification and may cause damage to the supply and the end product. • Utilisez toujours une source d’alimentation fournie ou recommandée par Extron. L’utilisation d’une source d’alimentation non autorisée annule toute conformité... -
Page 16: Front Panel Features
AUDIO IN 12VDC POWER ACTIVITY USB IN WIRE COLOR WIRE COLOR W G B W G B USB HUB4 AAP +V D- D+ +V D- D+ EXTENDER WM AAP Front Rear Extender WM AAP USB HUB4 AAP Desktop Power Supply Figure 6. -
Page 17: Mounting The Usb Hub4
ACTIVITY ACTIVITY USB HUB4 MAAP HUB4 USB MAAP Figure 8. USB HUB4 MAAP Front Panel USB hub connectors — Connect up to four USB peripheral devices (for example, a keyboard, mouse, or Web cam) to these female USB A connectors. Each USB port provides 100 mA of power when the HUB4 is powered via the host computer or 500 mA when it is powered by an Extron PS 1210 C 12 VDC external power supply (see... -
Page 18: Installing The Wall Box Or Mounting Bracket
Installing the wall box or mounting bracket Use a listed one-gang sized wall box or mounting bracket for the HUB4 MAAP or a listed two-gang box or bracket for the AAP model. Install cables into the wall, furniture, or conduits before installing the wall box or bracket. NOTE: The illustrations in this section show examples of a one-gang box mounting. -
Page 19: Mounting The Hub To A Mounting Frame
Attach the provided hex nuts to the studs on the back side of the frame (see figure 11). AAP 102 Mounting Frame IT Y T IV Extron USB HUB4 AAP Figure 11. Mounting a USB HUB4 AAP to a Two-gang Mounting Frame USB HUB4 Series • Installation... -
Page 20: Mounting The Hub To A Wall Box
USB HUB4 MAAP: Place the HUB4 MAAP in the one-gang opening in the mounting frame. Insert the included hex screws through the HUB4 front panel mounting holes and the holes in the MAAP mounting frame. Attach the provided hex nuts to the screws on the back of the frame. Mounting the hub to a wall box To mount the HUB4 to an electrical junction box in a wall or furniture, Mount the HUB4 into a mounting frame as described above under “Mounting the hub... -
Page 21: Rack Mounting
Wall Wall Mounting Bracket IT Y T IV Extron USB HUB4 MAAP USB Hub Extron CPM101 Mounting Frame Figure 13. Mounting a USB HUB4 MAAP to a Mounting Bracket Rack Mounting You can mount the HUB4 to an optional rack shelf or directly onto a rack using an Extron rack space frame, such as the CPM112R (for the MAAP model) or the AAP 301/302 (for the AAP model) listed on the Extron website . -
Page 22: Rack Mounting Procedure
If using a rack shelf, mount the shelf with the HUB4 attached, to the rack. #10-32 Screw/ Nylon Captive Cap Washer #4-40 Nut with Captive Washer TI VI USB HUB4 AAP AAP 301 Architectural Frame Figure 14. Mounting a USB HUB4 AAP Directly to a Rack Using an AAP 301 Frame RSB 126... -
Page 23: Extron Warranty
Extron Electronics makes no further warranties either expressed or implied with respect to the product and its quality, performance, merchantability, or fitness for any particular use. In no event will Extron Electronics be liable for direct, indirect, or consequential damages resulting from any defect in this product even if Extron Electronics has been advised of such damage.