Cruise Control - Toro Reelmaster 5510 Operator's Manual

Overview of the Virtual Pedal Stop (VPS) Feature
(continued)
• Whenever the maximum traction speed is changed via the supervisor maximum speed
settings or Virtual Pedal Stop, the traction pedal is automatically reprogrammed to use
the full pedal stroke between neutral and the new maximum speed. This means the
operator gains more precise control of the traction speed at lower maximum speed
settings.
Tips for Using Virtual Pedal Stop (VPS)
• Set the max speed temporarily lower for mowing the cleanup pass on the fairway.
• Set the max speed temporarily lower for improved control operating in or near the
maintenance shop.
• Set the max speed temporarily lower for improved control loading the machine onto a
trailer.

Cruise Control

Cruise Control Operation
The cruise-control switch
control to maintain the desired ground speed.
Pressing the rear of the switch turns the cruise
control off, the middle position of the switch
enables the cruise-control function, and the front of
the switch sets the desired ground speed.
After the cruise control switch is enabled and the
speed is set, use the InfoCenter display to adjust
the speed setting of the cruise control.
To disengage the cruise control use the following:
• When in transport range, press the reverse traction pedal, engage the parking brake, or
press the cruise control switch to the O
• When in mow range, press the reverse traction pedal, engage the parking brake,
disengage the PTO, or press the cruise control switch to the O
Note:
you would like to disengage cruise control but continue driving, press the traction pedal
and then disengage the cruise control for a smooth transition from cruise control to
manual speed control.
Adjusting the Cruise Control Speed
1. Enable the cruise control switch on the console.
2. Use the InfoCenter display to adjust the speed setting of the cruise control.
3464-490A
locks in the cruise
Disengaging cruise control results in the machine dynamically braking to a stop. If
G439039
position.
FF
Page 5–15
position.
FF
Operation: During Operation