Toro Reelmaster 5510 Operator's Manual page 47

Overview of the InfoCenter Display (continued)
Overview of the Menus
To access the InfoCenter display menu system, press the back button while at the main
screen. This brings you to the main menu. Refer to the following tables for a synopsis of the
options available from the menus.
Protected under Protected Menus—accessible only by entering PIN
Main Menu
Menu Item
Faults
Service
Diagnostics
Settings
Machine Settings
About
Service
Menu Item
Hours
Counts
Service RPM
Traction Pedal
Traction Pump
Virtual Speed Sensor
3464-490A
Description
The Faults menu contains a list of the recent
machine faults. Refer to the Service Manual or
contact your authorized Toro distributor for more
information on the Faults menu and the
information contained there.
The Service menu contains information on the
machine such as hours of use, counters, and
other similar numbers.
The Diagnostics menu displays the state of
each machine switch, sensor, and control
output. You can use this to troubleshoot certain
issues as it quickly tells you which machine
controls are on and which are off.
The Settings menu allows you to customize and
modify configuration variables on the display.
The Machine Settings menu allows you to
adjust the acceleration, speed, and
counterbalance thresholds.
The About menu lists the model number, serial
number, and software version of your machine.
Description
Lists the total number of hours that the machine,
engine and PTO have been on, as well as the
number of hours the machine has been
transported and service due.
Lists numerous counts the machine has
experienced.
Sets service RPM.
Calibrates the traction pedal.
Calibrates the traction pump.
Calibrates the virtual speed sensor.
Page 5–7 Operation: Before Operation