Cruise Control; Positioning The Seat; Headlights; Using The Blade Control (Pto) - Toro DH 220 Operator's Manual

Releasing the Parking Brake
1. Push down on the brake pedal (Fig. 2).
Note: The parking brake lever should release.
2. Gradually release the brake pedal.

Cruise Control

1. Accelerate the tractor to the desired speed.
2. Push the cruise control switch On (Fig. 2).
3. To decelerate, push the cruise control switch Off or
slowly apply the brake pedal.
Note: The battery must be fully charged for the cruise
control to operate reliably.

Positioning the Seat

The seat can move forward and backward. Position the seat
where you have the best control of the tractor and are most
comfortable.
1. Raise the seat and loosen the adjustment knobs (Fig. 3).
Figure 3
1. Adjustment knobs
2. Move the seat to the desired position and tighten the
knobs.

Headlights

The headlights are an integral function of the ignition
switch. Turn the ignition key clockwise to the Lights
position.

Using the Blade Control (PTO)

The blade control (PTO) knob engages and disengages
power to the blades.
Engaging the Blades
1. Depress the brake pedal to stop the tractor.
2. Pull the blade control (PTO) knob out to the Engaged
position (Fig. 4).
1. Blade control (PTO)
2. Engaged
Note: The blade control (PTO) light on the dash turns on
1
when you engage the blades (PTO) as shown in Figure 5.
m-4841
1. Grass collector warning
light
Disengaging the Blades
1. Depress the brake pedal to stop the tractor.
2. Push the blade control (PTO) knob into the Disengaged
position (Fig. 4).
14
2
1
Figure 4
3. Disengaged
2 1
Figure 5
2. Parking brake light
3. Blade control (PTO) light
3
3