Using Cruise Control; Using The Transport Latches - Toro 30873TE Operator's Manual

hydraulic-fluid temperature, and the fan automatically
reverses direction to blow debris off the rear screen.
You can manually reverse the fan by pressing the 2
outer buttons of the InfoCenter for 2 seconds—the fan
completes a manually initiated reverse cycle. Reverse
the fan when the rear screen is clogged or prior to
moving the machine into the shop or a storage area.
Figure 23

Using Cruise Control

The cruise-control switch locks in the pedal position to
maintain the desired ground speed. Pressing the rear
of the switch turns the cruise control off, the middle
position of the switch enables the cruise-control
function, and the front of the switch sets the desired
ground speed.
Note:
Pressing either the brake pedal or moving the
traction pedal into the R
also disengages the pedal position.
Using the Transport
Latches
Groundsmaster 4700 Only
Use the 2 rear-transport latches for the No. 6 and
g036843
7 cutting units when moving the machine over long
distances, rough terrain, when transporting, or storing
the machine.
g036844
33
position, for 1 second,
EVERSE
Figure 24
g038610