Cruise-Control Switch; Power-Takeoff (Pto) Switch - Toro Reelmaster 5610-D Operator's Manual

Cruise-Control Switch

Power-Takeoff (PTO) Switch

the maximum speed for each mode.
3464-493A
G461375
G453441
Page 4–3
Engage cruise control—briefly pivot
the switch forward.
Note:
Use the display buttons to
adjust the cruise control speed in 0.8
km/h (0.5 mph) increments.
Turn on cruise control—pivot the
switch to the middle position.
Turn off cruise control—pivot the
switch backward.
Disengage PTO—The machine is
in T mode (allows you to drive
RANSPORT
up to 16 km/h (10 mph) when the
maximum speed is not limited).
Engage PTO—The machine is in
M mode (allows you to drive up to 13
OW
km/h (8 mph) when the maximum
speed is not limited).
Note:
Use the protected menus
in the InfoCenter display to set
Product Overview: Controls