Toro Reelmaster 5510 Operator's Manual page 49

Overview of the InfoCenter Display (continued)
Machine Settings (continued)
Menu Item
Blade Count
Height of cut (HOC)
Front Reel Speed
Rear Reel Speed
Acceleration
About
Menu Item
Model
SN
S/W Revision
InfoCenter S/W Revision
Accessing Run Screens
1. From the Main Menu, press the right navigation button to access the Main Run Screen
displaying the fuel level and coolant temperature.
2. Press the right navigation button to scroll to the Secondary Run Screen displaying the
fuel level, coolant temperature, hours, battery voltage, and RPMs.
Protected Menus
There are operating configuration settings that are adjustable within Settings of the display.
To lock these settings, use the Protected Menu.
Note:
At the time of delivery, the initial password code is programmed by your distributor.
Accessing Protected Menus
Note:
The factory default PIN code for you machine is either 0000 or 1234.
If you changed the PIN code and forgot the code, contact your authorized Toro distributor for
assistance.
3464-490A
Description
Controls the number of blades on the reel for
reel speed.
Controls the height of cut (HOC) for determining
the reel speed.
Displays the calculated reel speed position for
the front reels. The reels can also be manually
adjusted.
Displays the calculated reel speed position for
the rear reels. The reels can also be manually
adjusted.
Low, Medium, and High settings control how
quickly the traction speed reacts when you
move the traction pedal.
Description
Lists the model number of the machine.
Lists the serial number of the machine.
Lists the software revision of the primary
controller.
Lists the software revision of the InfoCenter.
Page 5–9 Operation: Before Operation