Watchguard V10 User Manual page 374

CHAPTER 12: Creating a Remote User VPN Policy
2
In the Name and Description fields, type a name and
brief description for the IKE policy. The Description is
optional.
3 Select a preconfigured address group from the Peer
Address Group drop-down list or click New to create
a new address group.
For information on creating an address group, see "Defining an
address group" on page 180.
4 Select a preconfigured IKE Action from the drop-
down list, or click New to create a new IKE action.
For information on creating an IKE action, see "Defining an IKE
action" on page 310.
5 From the Peer Authentication ID field, select Any.
6 If you previously selected an IKE action that
incorporates RSA or DSA as the authentication type,
the Local Certificates options become active and the
RSA or DSA drop-down lists become active. From the
342 Vcontroller