Watchguard V10 User Manual page 116

CHAPTER 5: Router and Transparent Mode
If the Management Station has more than one Network
Interface Card (NIC), you must select the IP address of the
appropriate card from the drop-down list before proceed-
ing.
A status dialog box appears and remains open until the
discovery process is complete.
If no appliance is discovered
If no appliances are discovered, a Devices Not Found dia-
log box appears.
Check the Firebox Vclass appliance for the following:
- Verify that the appliance has been properly
- Verify that all cable connections are secure.
- Make sure that the appliance is started. The
Click Find Again to attempt another discovery.
84
connected to the network.
Ready LED should be lit.
Vcontroller