Watchguard V10 User Manual page 432

CHAPTER 16: System Information
2
Click the Blocked IP List tab.
The Runtime Blocked Site List dialog appears.
3
Click Add to add a blocked site.
The Add Blocked Site dialog appears.
4
In the IP Address field, type the IP address that you
want to block.
5 In the Expiration Time field, type an expiration time
for this site in minutes.
The maximum time you can block a runtime site for is 100,000
minutes, or approximately 70 days.
6
Click Apply to add the site to the list, or Cancel to
return to the window without adding a site.
400 Vcontroller