The Upgrade History - Watchguard V10 User Manual

3
Click OK.
The appliance performs the downgrade, and then reboots itself.
After the appliance reboots, the Login dialog box automatically
appears.
At this time, to use your previous policies and configura-
tion, you must restore the last backup of policies and con-
figurations that you saved when this version of the
software was in effect. Because a Firebox Vclass appliance
stores a maximum of two versions of software, you can
only downgrade to the previous version of the software.
After this downgrade is complete, your appliance will be
using an earlier version of software with the configurations
and policies that were in effect at that time. All subsequent
entries and changes will be lost.
For information about restoring older settings, see "Restor-
ing an Archived Configuration" on page 405.

The Upgrade History

The Upgrade History tab notes the dates, times, and ver-
sion numbers of all occasions when the Firebox Vclass
appliance has been upgraded or downgraded. The
upgrade history remains even if the Vclass appliance is
restored to the factory default.
To view the upgrade history:
1
Launch Vcontroller and log into the appliance.
2
Click Upgrade.
The Upgrade dialog box appears.
3
Click the Upgrade History tab.
Firebox Vclass User Guide
Upgrading and Downgrading the Software Version
75