This panel is automatically refreshed every sixty seconds;
however, you can click the blue star button to refresh man-
ually.
Logging out of Vcontroller
Make sure you properly log out of a Firebox Vclass appli-
ance after you finish with administrative tasks. Otherwise,
you may have trouble logging in later because a previous
session may still be active.
1
From the Vcontroller main page, click Log Out.
The Logout confirmation dialog box appears.
2
Click Yes.
If you have made any changes, a Flush dialog box appears
requesting to save these to the permanent data storage.
Firebox Vclass User Guide
The Vcontroller Main Page
The system name assigned to this appliance
The refresh button
The current status indicators for the
interfaces—green indicates active, red indicates
inactive
The total number of currently active tunnels
The total time this appliance has been in
continuous operation
The names and IP addresses of the
interfaces (Router Mode). In Transparent
Mode, only the System IP is listed.
69