Setting Up Wireless Network Security For Infrastructure Mode - Epson EB-810E User Manual

Wireless Network Projection
c
Select Passphrase, press [Enter], and enter a passphrase from 8 to 63
characters long.
d
When you finish entering a passphrase, go back to the Network Settings
screen, select Set, and follow the on-screen instructions to save your
settings and exit the menus.
Setting Up Wireless Network Security for
Infrastructure Mode
You can set up security for your projector to use on a wireless network with
infrastructure mode. Set up one of the following security types to match the
settings used on your network:
• WPA3-PSK security
• WPA2/WPA3-PSK security
• WPA3-EAP security
• WPA2/WPA3-EAP security
Contact your network administrator for guidance on entering the correct
information.
a
If you want to set up WPA3-EAP or WPA2/WPA3-EAP security, make
sure your digital certificate file is compatible with projector registration
type and placed directly on a USB storage device.
b
Press the [Menu] button, select the Network menu, and press [Enter].
c
Select Network Settings and press [Enter].
d
Select the Wireless LAN menu and press [Enter].
e
Select the Security setting and press [Enter].
148