Epson EB-810E User Manual page 64

Image Shape
f
Use the arrow buttons to select the area of the image you want to adjust.
Then press [Enter].
To reset the Quick Corner corrections, hold down [Esc] for about 2
seconds while the area selection screen is displayed, and then select
Yes.
g
Press the arrow buttons to adjust the image shape as necessary.
To return to the area selection screen, press [Enter].
• You can also select the area by pressing the following numeric
buttons on the remote control:
• [1] selects the upper left area.
• [3] selects the upper right area.
• [7] selects the lower left area.
• [9] selects the lower right area.
• If you see this screen, you cannot adjust the shape any further in
the direction indicated by the gray triangle.
h
Repeat steps 6 and 7 as needed to adjust any remaining corners.
i
When you are finished, press [Esc].
The Geometry Correction setting is now set to Quick Corner in the projector's
Installation menu.
64