Modifying The Black Level Adjustment Area - Epson EB-810E User Manual

Using Multiple Projectors
e
Adjust the black tone.
You can use the Brightness buttons to adjust the RGB values at the same
time.
f
Repeat steps 4 and 5 as needed to adjust any remaining screen areas.
g
When you are finished, press [Menu].
Related Links
g
• "Modifying the Black Level Adjustment Area"

Modifying the Black Level Adjustment Area

If there are areas where the color does not match after adjusting the Black Level
setting, you can adjust them individually.
a
Select Area Correction in the Black Level setting and press [Enter].
p.127
b
Select Start Adjustments and press [Enter].
Boundary lines indicating where images overlap are displayed. The lines
are displayed based on the Edge Blending setting.
c
Use the arrow buttons to select the boundary line you want to adjust. Then
press [Enter].
The selected line is displayed in orange.
d
Use the arrow buttons to adjust the line position. Then press [Enter].
e
Use the arrow buttons to select the point you want to move. Then press
[Enter].
The selected point is displayed in orange.
You can change the number of the displayed points using the Points
setting.
127