Inverting the Audio Channels
You can invert the audio's left and right channels to match the projector
installation position.
a
Turn on the projector and start a presentation.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Signal I/O menu and press [Enter].
d
Select Inverse Audio and press [Enter].
e
Select setting according to the installation position and press [Enter].
• When the projector is mounted to the wall or ceiling, set to On.
• When the projector is placed on a table, set to Off.
f
Press [Menu] or [Esc] to exit the menus.
93