Selecting Wireless Network Settings In Mac; Setting Up Wireless Network Security For Simple Ap Mode; Setting Up Wireless Network Security For Infrastructure Mode - Epson EB-L735U User Manual

Wireless Network Projection
b When connecting to devices over a wireless network access point, make
sure Wi-Fi is turned on and select the network name (SSID) of the
network the projector is connecting to.
c Click Connect.

Selecting Wireless Network Settings in Mac

Before connecting to the projector, select the correct wireless network in Mac.
a
Click the Wi-Fi icon on the menu bar at the top of the screen.
b When connecting to devices over a wireless network access point, make
sure Wi-Fi is turned on and select the network name (SSID) of the
network the projector is connecting to.
Setting Up Wireless Network Security for Simple AP
Mode
You can set up security for your projector to use on a wireless network with
simple AP mode. You can use WPA2-PSK security.
Contact your network administrator for guidance on entering the
correct information.
a
a Press the [Menu] button, select the Network menu, and press [Enter].
Select Network Settings and press [Enter].
b
c Select Passphrase, press [Enter], and enter a passphrase from 8 to 63
characters long.
d When you finish entering a passphrase, go back to the Network
Settings screen, select Set, and follow the on-screen instructions to save
your settings and exit the menus.
Setting Up Wireless Network Security for
Infrastructure Mode
You can set up security for your projector to use on a wireless network with
infrastructure mode. Set up one of the following security types to match the
settings used on your network:
• WPA3-PSK security
• WPA2/WPA3-PSK security
• WPA3-EAP security
• WPA2/WPA3-EAP security
Contact your network administrator for guidance on entering the
correct information.
a
139