Updating The Firmware; Updating Firmware Using A Usb Storage Device - Epson EB-810E User Manual

Updating the Firmware

When you select the Firmware Update option in the projector's Initial/All
Settings menu, the projector enters firmware update mode and is ready to
perform a firmware update using the USB-A or USB-B port.
You can also update the projector's firmware over the network using the Epson
Projector Management software. See the Epson Projector Management Operation
Guide for instructions.
Related Links
g
• "Updating Firmware Using a USB Storage Device"
• "Updating Firmware Using a Computer and USB Cable"

Updating Firmware Using a USB Storage Device

You can update the projector's firmware using a USB storage device.
Responsibility for updating the firmware lies with the customer. If a
firmware update fails due to problems such as a power failure or
communication problems, a fee will be charged for any necessary repairs.
a
Download the projector firmware file from the Epson Web site.
b
Copy the downloaded firmware file to the root folder (highest folder in the
hierarchy) of the USB storage device.
• The USB storage device must be formatted in FAT format.
• Do not copy any other files to the USB storage device.
• Do not change the firmware's file name. If the file name is
changed, the firmware update will not start.
• Check that the firmware file you copied is the correct file for your
projector model. If the firmware file is not correct, the firmware
update will not start.
p.239
p.240
c
Connect the USB storage device to the projector's USB-A port.
• Connect the USB storage device directly to the projector. If the
USB storage device is connected using a USB hub, the firmware
update may not be applied correctly.
d
Press the [Menu] button, select the Initial/All Settings menu, and press
[Enter].
e
Select Firmware Update and press [Enter].
239