Shutting Off the Image and Sound Temporarily
You can temporarily turn off the projected image and sound.
This is effective when you want to redirect your audience's attention during a
presentation.
Any sound or video action continues to run, however, so you cannot resume
projection at the point that you stopped it.
a
Press the [A/V Mute] button on the remote control to temporarily stop
projection and mute any sound.
b
To turn the image and sound back on, press [A/V Mute] again.
• The projector's power automatically turns off 30 minutes after A/V
Mute is enabled. You can disable this feature.
Operation > A/V Mute Timer
s
109