Table of Contents
Advertisement
Wireless Network Connection
a
Click the Wi-Fi icon on the menu bar at the top of the screen.
b
When connecting in Advanced connection mode, make sure Wi-Fi is
turned on and select the network name (SSID) of the network the
projector is connecting to.
Setting Up Wireless Network Security
You can set up security for your projector to use on a wireless network. Set up
one of the following security options to match the settings used on your
network:
• WPA2-PSK security *
• WPA3-PSK security **
• WPA2/WPA3-PSK security **
• WPA3-EAP security **
• WPA2/WPA3-EAP security **
* Available only for the Quick connection mode.
** Available only for the Advanced connection mode.
Contact your network administrator for guidance on entering the
correct information.
a
a
If you want to set up the WPA3-EAP or WPA2/WPA3-EAP security,
make sure your digital certificate file is compatible with projector
registration and placed directly on the USB storage device.
b
Press the [Menu] button, select the Network menu, and press [Enter].
c
Select Network Configuration and press [Enter].
d
Select the Wireless LAN menu and press [Enter].
Select the Security setting and press [Enter].
e
f
Select the security settings to match your network settings.
g
Do one of the following according to the security you selected.
• WPA2-PSK, WPA3-PSK, or WPA2/WPA3-PSK: Select Complete
and follow the on-screen instructions to save your settings and exit
the menus.
• WPA3-EAP, WPA2/WPA3-EAP: Select EAP Method and press
[Enter].
h
Select the protocol for authentication as the EAP Type setting.
i
To import your certificate, select the certificate type and press [Enter].
• Client Certificate for the PEAP-TLS or EAP-TLS type
• CA certificate for all EAP types
You can also register the digital certificates from your Web
browser. However, be sure to register just once or the certificate
may not install correctly.
a
j
Select Register and press [Enter].
k
Follow the on-screen instructions to connect a USB storage device to
the projector's USB-A port.
l
Press [Enter] to display the certificate list.
m
Select the certificate to import using the displayed list.
A message is displayed prompting you to enter the password for the
certificate.
n
Enter a password and press [Enter].
The certificate is imported and a completion message appears.
42
Advertisement
Table of Contents
