Securing The Rail Assembly For A 2-Post Mid-Mount Configuration; Securing Mid-Mount Rail Assembly - Enterasys S Series Hardware Installation Manual

2-Post Rack Mount Installation

Securing the Rail Assembly for a 2-Post Mid-Mount Configuration

When securing the rail and mid-bracket assembly in a mid-mount configuration:
1. Ensure that a cage nut is installed in the rail ear square opening as described in
to Rail 7.25 Inch Flush Mount or Mid-Mount
2. Align the mid-bracket ear openings with the outer front flange rack post openings as shown in
Figure
3. Secure the rail assembly with two screws or fasteners appropriate to the rack at both the rail
ear and mid-bracket ear.
Figure C-12
1 Rack appropriate screws or fasteners (4)
2 Rail ear square opening
C-14 Optional Rack Mount Rail Kit Installation
C-12.

Securing Mid-Mount Rail Assembly

Assembly" on page C-11.
3 Cage nuts (2)
"Mid-Bracket