Pluggable Transceiver Specifications; Com Port Pinout Assignments; Com Port Pin Assignments - Enterasys S Series Hardware Installation Manual

Pluggable Transceiver Specifications

Table A-2 Specifications (continued)
Item
SSA-FB-AC-PS-A and SSA-FB-AC-PS-B (Power Supplies)
Input Frequency
Input (Voltage/Current) at Output Power
Approximate Weight
Environmental
Operating Temperature
Storage Temperature
Operating Relative Humidity
Pluggable Transceiver Specifications
For SFP and SFP+ transceiver specifications, refer to the datasheet at the following URL:
http://www.enterasys.com/products/transceivers-ds.pdf

COM Port Pinout Assignments

The COM port is an RJ45 communications port for local access to local management. Refer to the
table below for the COM port pin assignments.
Table A-3 COM Port Pin Assignments
Pin
1
2
3
4
5
6
7
8
A-2 Specifications
Signal Name
Transmit Data (XMT)
Data Carrier Detect (DCD)
Data Set Ready (DSR)
Receive Data (RCV)
Signal Ground (GND)
Data Terminal Ready (DTR)
Request to Send (RTS)
Clear to Send (CTS)
Specification
50 to 60 Hz
100 to 240 V AC: 5.29 to 2.2A at 450 watts
0.86 kg (1.90 lb)
5°C to 40°C (41°F to 104°F)
-30°C to 73°C (-22°F to 164°F)
5% to 95% (non-condensing)
Input/Output
Output
Output
Input
Input
NA
Output
Input
NA