Required Tools - Enterasys S Series Hardware Installation Manual

This appendix describes the installation and use of the optional SSA Universal Rack Mount Kit,
model number SSA-FB-MOUNTKIT. This optional rack mounting kit provides for flexible
mounting options in both 4-post and 2-post rack installations.
For information about...

Required Tools

Contents of Mounting Kit
Installation Site Requirements
Required Order of Installation
Removing the Rack Mount Ears from the SSA Switch
Installing the Adapter Plates
4-Post Rack Mount Installation
2-Post Rack Mount Installation
Required Tools
• ESD wrist strap (included with the S-Series chassis)
• Phillips screwdriver
Electrical Hazard: Only qualified personnel should perform installation procedures.
Riesgo Electrico: Solamente personal calificado debe realizar procedimientos de instalacion.
Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und qualifiziertes
Personal vorgenommen werden.
Risques d'électrocution:Seul un personnel qualifié doit effectuer les procédures d'installation.
Optional Rack Mount Rail Kit
Enterasys S-Series Stand Alone (SSA) Hardware Installation Guide C-1
C
Installation
Refer to page...
C-1
C-2
C-2
C-3
C-3
C-3
C-5
C-8