Section Iii Removal And Replacement Of Serviceable Parts - Vulcan-Hart E24L Service Manual

SECTION III
REMOVAL AND REPLACEMENT
OF SERVICEABLE PARTS
WARNING: UNPLUG OVEN BEFORE SERVICING.
WARNING: CERTAIN PROCEDURES IN THIS SECTION REQUIRE ELECTRICAL TEST OR
MEASUREMENTS WHILE POWER IS APPLIED TO THE OVEN. EXERCISE EXTREME
CAUTION AT ALL TIMES. IF TEST POINTS ARE NOT EASILY ACCESSIBLE
DISCONNECT POWER, ATTACH TEST EQUIPMENT AND REAPPLY POWER TO TEST.
DROPPING OF CONTROL MANIFOLD COVER
1. Pull crumb tray out. (Fig. 4)
2. Remove (2) 10-24 sheet metal screws (Fig. 5)
Fig. 4
Fig. 5
10