Vulcan-Hart E24L Service Manual page 15

5. Squeeze the light mounting tabs in towards the light body casing and push the light through the manifold
cover opening and out of the appliance. (Fig. 13)
6. Install new light by reversing steps 1 through 5.
REMOVAL OF THERMOSTAT
1. Follow steps 1-2 for removal of control manifold cover.
2. Pull thermostat knob from the front of the control manifold cover.
3. Remove (2) screws from the front of the manifold cover. (Fig. 14)
Fig. 13
Fig. 14
15