Vulcan-Hart E24L Service Manual page 22

2. Using a 5 ⁄ " socket, remove (2) hex head screws from the upper corners of the control panel.
16
3. Using a 5 ⁄ " socket, remove the hex head screws holding the plate mounting bracket to the front burner
16
box cover. (Fig. 28)
4. Flip the hot top plate assembly over. (Fig. 29)
5. Remove (2) 12mm nuts holding the mounting bracket to the plate assembly. (Fig. 29)
Fig. 28
Fig. 29
22
SCREW LOCATION