Changing The Handwheel - Dürkopp Adler D887 e-con Operating Instructions Manual

Setup
Operating Instructions D887 e-con - 00.0 - 11/2023
Fig. 102: Assembling the tilt sensor (2)
 The machine is aligned correctly when the magnet and
the sensor are positioned opposite each other.

7.11 Changing the handwheel

The handwheel that ships with the machine is the large handwheel.
The large handwheel can be replaced with the included small
handwheel.
Important
When assembling the small handwheel, the included cover must
be positioned above the handwheel and tightened on the machine.
191