Threading The Needle Thread - Dürkopp Adler D887 e-con Operating Instructions Manual

Operation
Operating Instructions D887 e-con - 00.0 - 11/2023
Disturbance
An incorrect hook side clearance can cause the following
disturbances:
• Changing to a thinner needle:
• Skipped stitch
• Thread damage
• Changing to a thicker needle:
• Damage to the tip of the hook
• Damage to the needle
4.5

Threading the needle thread

WARNING
Risk of injury from needle tip and moving parts!
Puncture, cutting and crushing possible.
Turn off the machine before threading the thread.
Information
You will find a video with instructions regarding this chapter on
the Commander Delta control panel of the machine.
To start the instructional video:
1. Switch on the machine.
2. Click on the tile
 A window opens named Threading: one needle.
The instructional video starts automatically.
3. Click on the tile
The instructional video Threading: two needles starts automatically.
on the control panel.
in the left menu bar.
25