Changing The Handwheel - Dürkopp Adler D869 e-con Operating Instructions Manual

158

7.11 Changing the handwheel

The handwheel that ships with the machine is the large handwheel.
The large handwheel can be replaced with the included small
handwheel.
Important
When assembling the small handwheel, the included cover must
be positioned above the handwheel and tightened on the machine.
Fig. 77: Changing the handwheel
(1) - Large handwheel
(2) - Hole
(3) - Screws
(4) - Pin
To change the handwheel:
1. Loosen the screws (3).
2. Remove the large handwheel (1).
①
②
③
④
⑤
⑥
⑦
(5) - Small handwheel
(6) - Cover
(7) - Screws
Operating Instructions D869 e-con - 00.0 - 06/2023
Setup