Setting The Processor Speed - HP NetServer LH 6000 Installation Manual

All manuals and user guides at all-guides.com
Chapter 7
19. Reconnect cables and power cords to the NetServer.
20. Follow the procedure in Chapter 3, "Opening and Closing the HP
NetServer," for closing up the server.
21. Restore HP NetServer to normal operation.

Setting the Processor Speed

1. Determine the processor speed setting from Table 7-1.
CPU Speed
CPU Speed
CPU Speed
Clear Config
Clear Password
Not Used
Figure 7-6. Location of Configuration Switch on System Board
2. Set the speed switches of the configuration switch as listed in Table 7-1.
(Use a small, flat-blade screwdriver or similar tool.)
76
Installing Additional Processors