13 Alternative Rack Mounting
Introduction
This chapter provides the instructions for mounting the HP NetServer in an HP
Systems rack. Figure 13-1 shows the Systems rack.
Rack
Template
Slide
Leveler
Feet
If you have the newer HP System/E or System/U racks, go to Chapter 8. If you are
mounting the HP NetServer in a non-HP rack, see the documentation in the
appropriate rack accessory kit.
NOTE
The pedestal HP NetServer LH 6000 cannot be rack-installed
without a conversion kit. Contact your HP reseller for
information about the HP NetServer LH 6000 to HP NetServer
LH 6000r Conversion Kit.
All manuals and user guides at all-guides.com
Bar
Column
Nut
Figure 13-1. Installation Hardware
Inside Face
Outside
Face
Handles
NetServer
Bezel
Latch
Bezel
Slide
Bezel
Member
Hinge
Anti-Tip
Foot
147