HP NetServer LH 6000 Installation Manual page 43

Chapter 3
(1) Unlock the bezel.
(2) Pull bezel toward you, then
(3) up and away from the front panel,
releasing the tabs from the slots
at the bottom of the front panel.
Figure 3-7. Removing the HP NetServer LH 6000 Bezel
CAUTION The NetServer covers are heavy. Support them as you remove
them, and allow room to move them away from the NetServer
and for storage when removed.
3. Remove the left cover by loosening the thumbscrew and then pulling the
cover forward to disengage it. Lift it outward and away from the chassis
(see Figure 3-8).
All manuals and user guides at all-guides.com
Opening and Closing the HP NetServer
2
3
1
35