HP NetServer LH 6000 Installation Manual page 81

Chapter 7
CAUTION Wear a wrist-strap and use a static-dissipating work surface
connected to the chassis when handling components. Ensure
the metal of the wrist strap contacts your skin.
6. Place the system board assembly on an anti-static pad.
7. Unpack the processor shipping box and check the contents against its
packing list.
CAUTION
Do not remove the processor from its bag until you are ready
to install it. Make sure the bag remains sealed.
8. Loosen the thumbscrew and open the access cover to the processor slots
(see Figure 7-2).
Thumbscrew
Access Cover
9. Remove the processor to be added from the sealed bag.
10. Open the latches and remove the slot terminator/baffle from the next
available slot as shown in Figure 7-3.
11. Open the latches on top of the processor.
All manuals and user guides at all-guides.com
Figure 7-2. Access to the Processors
Installing Additional Processors
Processor
board
System
board
73