Ricoh Di-C1 Manual page 83

After Moving the Machine a Long Distance
Do the "Auto Colour Registration" as follows.
This optimizes colour registration.
First, do "Forced Line Position Adj. Mode c" (SP2-
111-3).
Then, do "Forced Line Position Adj. Mode a"
(SP2-111-1).
To check if SP 2-111-1 was successful, watch the
screen during the process. A message is
displayed at the end.
Also, you can check the result with SP 2-194-007
(0: Completed successfully, 1: Failed).
Make sure that the side fences in the trays are
correctly positioned.
Slide 83
SP 2111-1 and –3 are used at other occasions, after replacing certain parts.
We will see this again.
For SP 2194, see these sections of the service manual.
Service Manual, Appendix, Process Control Error
Service Manual, Appendix, Troubleshooting Guide
83
Di-C1 Training
Conditions