Ricoh Di-C1 Manual page 23

Paper Handling Options – Di-C1a/c
H model H model
H model
1bin Tray
1bin Tray NEW
NEW
Internal Shift Tray NEW
Internal Shift Tray NEW
Internal Finisher
NEW
Internal Finisher NEW
Note)
ARDF and Platen will be
provided as options for Asia
Pacific region and China region.
Slide 23
You can install one of the following paper feed options
One-tray paper feed unit (requires the caster table, or the machine
cannot be moved around)
Two-tray paper feed unit
You can install the following finishing/output options:
Shift tray and/or one-bin tray (you can install both of these if you wish)
Internal finisher
If you install the internal finisher, you cannot install the one-bin tray or
shift tray.
If you install the internal finisher, you can install the side tray to
receive fax outputs, instead of the one-bin tray.
The side tray can be installed with any of the other finishing options at
the same time.
Paper feeds out to the side tray face down. First the paper goes out
towards the standard tray, then it switches back to the right side of
the machine and out to the side tray, face down.
DI-C1 mainframe includes:
DI-C1 mainframe includes:
• ARDF
• ARDF
• Auto Duplex
• Auto Duplex
• Bypass Tray
• Bypass Tray
• 250 sheet x2
• 250 sheet x2
*The Caster Tray is
mandatory on 500 x 1 paper
bank for service activity.
500 x 1 paper bank
500 x 1 paper bank
500 x 2 paper bank
500 x 2 paper bank
Caster Table
Caster Table
23
Di-C1 Training
USB
USB
NEW
NEW
SD
SD
NEW
NEW
Side Tray
Side Tray
NEW
NEW