Table of Contents
Advertisement
When is it Done? (1)
Initial:
Immediately after the power is turned on, or when
the machine recovers from the energy saver
mode.
Done if one of these conditions occurs:
» Temperature has changed by more than a certain
amount after the drum motor stopped.
» Humidity has changed by more than a certain amount
after the drum motor stopped.
» 250 b/w or 100 full colour prints were made since the
previous adjustment (SP 3511 005/006).
And
The machine was not used for more than 6 hours (SP
3522 002).
Slide 169
The threshold levels are set by SP modes.
No process control before or after ACC.
169
Di-C1 Training
Advertisement
Table of Contents
