Table of Contents
Advertisement
Toner Supply Control Modes
This machine uses 5 toner supply modes. The mode used
depends on SP3-044-001 to –004.
These are the five modes:
PID control mode
PID control mode with fixed VT
Fixed supply mode
MBD control mode: This is the default mode.
MBD control mode with fixed VT
You can select a different mode for each colour, if
necessary.
Use SP 3-044 if the TD sensor and/or ID sensor breaks and
no spare part is available.
After replacing the part, return the SP setting to the default.
See the next slide for details.
Slide 178
MBD control mode is a new one. It was not used in Athena-C1/C2. For more,
see the next slide.
REF
REF
178
Di-C1 Training
Advertisement
Table of Contents
