Ricoh Di-C1 Manual page 361

Previously stored files on the SD card can be
overwritten or left intact.
After you enable this function with the printer bit
switch, the following two user tools are added to
the List/Test Print tab of the Printer Features user
tools menu.
Card Save (Add):
» Appends files to the SD Card.
» Does not overwrite existing files.
» If the card becomes full or if all file names are used, an
error will be displayed on the operation panel.
Subsequent jobs will not be stored.
Card Save (New)
» Overwrite files in the card's /prt/cardsave directory.
Slide 361
Study the procedure in the service manual.
Service Manual - System Maintenance Reference - Card
Note that there is no message on the screen to indicate that a file was copied
to the SD card successfully. But there are some error messages that appear
if things go wrong.
If an error occurs, press "OK". The device will discard the job and return to
the ready state.
Card Save (2)
361
Di-C1 Training
Save Function