Ricoh Di-C1 Manual page 319

Shifting and Stapling (2)
Belt Roller
Position Sensor
Slide 319
The belt roller position sensor detects the position of the belt roller unit.
When the belt roller solenoid releases the idle gear, the gear to the right
turns. This has a cam and shaft attached to it, and this lifts the belt roller unit.
Belt Roller
Top diagram: The pick-
Unit
up roller unit moves
down to send the next
sheet to the jogger tray.
Bottom diagram: When
Idle Gear the stack is complete,
the belt roller solenoid
releases the idle gear,
and the belt roller unit
lifts.
Then the pick-up roller
changes direction
again and feeds the
stack out.
Belt Roller
Solenoid
319
Di-C1 Training