Table of Contents
Advertisement
Original Transport and Feed-out
DF Exposure Glass
Transport motor: Feeds the original through the scanner
Motor speed is set by the reproduction ratio
Slide 273
The machine scans the original through the DF exposure glass.
The original stops at the registration sensor. But, there is no skew correction
at this time (this is because the feed motor in the ADF stops). The original
stops here for timing, to feed the original at the correct time to synchronize
with the remaining part of the copy process.
Single-sided
D366 Service Manual, Detailed Section Descriptions,
Basic Operation, Original Transport and Exit
273
Di-C1 Training
Advertisement
Table of Contents
