Ricoh Di-C1 Manual page 315

Straight feed-out
Paper goes directly to the output tray without
sorting or stapling
Shift sorting
Odd-numbered sets (set 1, 3, 5, etc): The front
fence jogs the output, and the printout moves to
the rear.
Even-numbered sets (set 2, 4, 6, etc): The rear
fence jogs the output, and the printout moves to
the front.
Stapling
Each set is stapled in the jogger tray before it is
fed to the output tray.
Slide 315
Straight feed-out (automatically selected if the paper type is outside the
specified weight range for the finisher)
Each page is fed out immediately after it comes from the copier.
Shift sorting (if selected with the operation panel or printer driver)
This lets the user separate the sets easily.
Stapling (if selected with the operation panel or printer driver)
Each set is fed the same as even-numbered sets in shift sorting mode.
But, the set is stapled in the jogger tray before it is fed to the output tray.
All sets are moved to one side.
Finisher Modes
315
Di-C1 Training