Functions; Memory Function; Memory - Sekonic Litemaster Pro L-478D Operating Manual

6

Functions

6-1. Memory Function

This meter can store up to nine measured values in memory for incident light
and reflected light simultaneously. This function can be used in all modes except
Illuminance/Luminance measuring and Multiple (cumulative) Flash modes.

6-1-1. Memory

1. Press the Measuring button
meter to take a measurement and display a
value on the measuring screen.
2. Press the Memory button
measured value. An M 1 will appear at the to
of the screen to indicate one value has been
memorized and an indicator will appear on the
analog scale.
3. Repeat steps 1 and 2 as desired to memorize
up to 9 values for comparison.
,
•
Memory Function cannot be used with the following modes.
• Illuminance Measuring Mode (lux, fc)
• Luminance Measuring Mode (cd/m
• Cord Flash Accumulative Mode
• Cordless Flash Accumulative Mode
• Radio Flash Accumulative Mode (for L-478DR only)
•
The tenth or more measurement will be displayed but can not be memorized.
8
on the side of
5
to memorize
, fl)
2
43
Example of T priority
in Ambient light
Memorized measuring values (f-stop)
Setting
value
Measuring
value (f-stop)