Zone Sensor Options - Trane VUV Installation, Operation And Maintenance Manual

Installation - Controls

Zone Sensor Options

Control sensor options include both unit-mounted (factory-
installed) and wall-mounted sensors. Tracer® controller
options available for the zone sensors are:
• Tracer® ZN520 is a discrete speed controller that can be
used in a stand-alone application or can communicate with
Figure 36. Unit-mounted zone sensor
(SP, OCC/UNOCC, OALMH)
Figure 39. Unit-mounted fan speed
control, wall-mounted zone
sensor (SP, OCC/UNOCC,
COMM)
Figure 42. Air-Fi® WCS, Air-Fi® WCI
(SP, OALMH0 (UC400-B/
Symbio™ 400-B only)
40
•
Zone sensors have an internal thermistor and operate on 24
Vac. Options with setpoint knobs are available in Fahrenheit or
Celsius.
Figure 37. Wall-mounted zone sensor
(SP, OCC/UNOCC, OALMH)
Figure 40. Wall-mounted wireless
zone sensor (WZS), unit-
mounted receiver (SP,
OCC/UNOCC)
a building automation system using LonTalk
Communication.
UC400-B/Symbio™ 400-B delivers single zone VAV
control in a stand-alone operation or as part of a building
automation system using BACnet
Figure 38. Wall-mounted display
Figure 41. Wall-mounted wireless
®
®
communications.
sensor (SP, OCC/UNOCC,
OALMH)
display sensor, unit-
mounted receiver (SP,
OALMH)
UV-SVX005G-EN